 |
|
|
 |
|
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
|
 |
|
 |
|
 |
|
| Each year material corrosion and defects, if undetected and rectified, cause such problems as environmental pollution, risks to the health and safety of personnel, damage to property and loss of production. The financial cost of this to a company can be enormous and in some extreme cases disastrous to the point of bankruptcy. |  |
 |
Early detection
of material corrosion and defects must be of paramount importance
to any company wishing to prevent any of the above outlined problems.
SLOFEC inspection services
are our unique solution. This is an inspection technique that has
been proven on projects within the oil, gas, chemical, power generation
and other industries both onshore and offshore in Europe, the Middle
East, Asia and North America. |
The technical advantages of utilising SLOFEC
technology are: |
inspection of ferromagnetic and non-ferromagnetic material |
|
non-invasive inspection |
|
minimum pre-inspection cleaning preparation of the material surface |
|
fast screening method 20 to 30m/min - subject to access |
|
high detection sensitivity |
|
heavy wall material inspection up to 35mm |
|
through coating/wrapping inspection up to 10mm in some pressure wrapping cases up to 15mm |
|
inspection of material with aluminium or galvanized coatings |
|
distinction between external/topside and internal/underside defects |
|
high surface temperature inspection up to 120°C |
|
user friendly colour mapped reports |
|
monitoring progression of defects and corrosion for direct electronic recorded comparisons in order to enable realistic planned preventive maintenance |
| and as such the resultant economic and operational benefits to the customer are very obvious. |
| Inspection
Overview |
shows the inspected area |
 |
| Scan
defect map |
shows coloured mapping of defects | |
| Scan
report |
shows detailed coloured mapping of defects in defined areas | |
| General
settings report |
parameter of equipment, calibration and subject data |
| Bulk
Storage Tanks - Cylindrical and Spherical: Process Piping, Pipelines, Caissons and Riser
Pipes: Pressure and Static Head Vessels: Furnace and Boiler Tubes and Waterwalls:
Bridges Rail Lines |
|
||||||||
SLOFEC™ is trademark and technology of
KontrollTechnik GmbH – Germany
Home Page : SLOFEC™ : Tube Inspection : Component Inspection : Enquiries
Innospection Ltd |
Unit
27 - Webb Ellis Industrial Park - Woodside Park Rugby - Warwickshire - CV21 2NP - UK Phone: +44 (0) 01788 547 294 Fax: +44 (0) 01788 547 299 |
Howemoss Avenue - Kirkhill Industrial Estate - Dyce Aberdeen - AB21 0GP - Phone: +44 (0) 1224 724 744 Fax : +44 (0) 1224 774 087 |
Innospection Ltd Registered in England & Wales No. 3819359 | VAT Registration 738 9347 83
Site developed by in.house.media